немогу настройтить тор как написано в этом гайде может кто может растолкавать или выложить скрины (вот тот гайд http://zhyk.ru/forum/showthread.php?t=216559) там непонять в какой именно строке torrc вводить те текста вообщем я нечего там непонял может мне конить разжевать гайд по тору?
Добавлено через 4 минуты
куда именно в блокноте надо вводить ExitNodes chomsky, rainbowwarrior, politkovskaja, rockhall, blutmagie, blutmagie2, blutmagie3, blutmagie4
StrictExitNodes 1
EntryNodes chomsky, rainbowwarrior, politkovskaja, rockhall, blutmagie, blutmagie2, blutmagie3, blutmagie4
StrictEntryNodes 1
ExcludeNodes {RU}, {HK}, {JP}, {KW}, {MY}, {TH}, {TN}, {VN}
в строке может кто скрин кинет
Последний раз редактировалось NERTZ; 07.08.2011 в 11:49.
Причина: Добавлено сообщение
## Configuration file for a typical Tor user
## Last updated 12 April 2009 for Tor 0.2.1.14-rc.
## (May or may not work for much older or much newer versions of Tor.)
##
## Lines that begin with "## " try to explain what's going on. Lines
## that begin with just "#" are disabled commands: you can enable them
## by removing the "#" symbol.
##
## See 'man tor', or [Ссылки могут видеть только зарегистрированные пользователи. ],
## for more options you can use in this file.
##
## Tor will look for this file in various places based on your platform:
## [Ссылки могут видеть только зарегистрированные пользователи. ]
## Replace this with "SocksPort 0" if you plan to run Tor only as a
## relay, and not make any local application connections yourself.
SocksPort 9050 # what port to open for local application connections
SocksListenAddress 199.48.147.39 # accept connections only from localhost
#SocksListenAddress 192.168.0.1:9100 # listen on this IPort also
## Entry policies to allow/deny SOCKS requests based on IP address.
## First entry that matches wins. If no SocksPolicy is set, we accept
## all (and only) requests from SocksListenAddress.
#SocksPolicy accept 192.168.0.0/16
#SocksPolicy reject *
## Logs go to stdout at level "notice" unless redirected by something
## else, like one of the below lines. You can have as many Log lines as
## you want.
##
## We advise using "notice" in most cases, since anything more verbose
## may provide sensitive information to an attacker who obtains the logs.
##
## Send all messages of level 'notice' or higher to C:\Documents and Settings\Application Data\Tor\notices.log
#Log notice file C:\Documents and Settings\Application Data\Tor\notices.log
## Send every possible message to C:\Documents and Settings\Application Data\Tor\debug.log
#Log debug file C:\Documents and Settings\Application Data\Tor\debug.log
## Use the system log instead of Tor's logfiles
#Log notice syslog
## To send all messages to stderr:
#Log debug stderr
## Uncomment this to start the process in the background... or use
## --runasdaemon 1 on the command line. This is ignored on Windows;
## see the FAQ entry if you want Tor to run as an NT service.
#RunAsDaemon 1
## The directory for keeping all the keys/etc. By default, we store
## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
#DataDirectory @LOCALSTATEDIR@/lib/tor
## The port on which Tor will listen for local connections from Tor
## controller applications, as documented in control-spec.txt.
#ControlPort 9051
## If you enable the controlport, be sure to enable one of these
## authentication methods, to prevent attackers from accessing it.
#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701A D684053EC4C
#CookieAuthentication 1
############### This section is just for location-hidden services ###
## Once you have configured a hidden service, you can look at the
## contents of the file ".../hidden_service/hostname" for the address
## to tell people.
##
## HiddenServicePort x y:z says to redirect requests on port x to the
## address y:z.
#HiddenServiceDir C:\Documents and Settings\Application Data\Tor\hidden_service/
#HiddenServicePort 80 127.0.0.1:80
################ This section is just for relays #####################
#
## See [Ссылки могут видеть только зарегистрированные пользователи. ] for details.
## Required: what port to advertise for incoming Tor connections.
#ORPort 9001
## If you want to listen on a port other than the one advertised
## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment the
## line below too. You'll need to do ipchains or other port forwarding
## yourself to make this work.
#ORListenAddress 0.0.0.0:9090
## A handle for your relay, so people don't have to refer to it by key.
#Nickname ididnteditheconfig
## The IP address or full DNS name for your relay. Leave commented out
## and Tor will guess.
#Address noname.example.com
## Define these to limit how much relayed traffic you will allow. Your
## own traffic is still unthrottled. Note that RelayBandwidthRate must
## be at least 20 KBytes.
#RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps)
#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB/s (1600Kbps)
## Contact info to be published in the directory, so we can contact you
## if your relay is misconfigured or something else goes wrong. Google
## indexes this, so spammers might also collect it.
#ContactInfo Random Person <nobody AT example dot com>
## You might also include your PGP or GPG fingerprint if you have one:
#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com>
## Uncomment this to mirror directory information for others. Please do
## if you have enough bandwidth.
#DirPort 9030 # what port to advertise for directory connections
## If you want to listen on a port other than the one advertised
## in DirPort (e.g. to advertise 80 but bind to 9091), uncomment the line
## below too. You'll need to do ipchains or other port forwarding yourself
## to make this work.
#DirListenAddress 0.0.0.0:9091
## Uncomment to return an arbitrary blob of html on your DirPort. Now you
## can explain what Tor is if anybody wonders why your IP address is
## contacting them. See contrib/tor-exit-notice.html for a sample.
#DirPortFrontPage /etc/tor/exit-notice.html
## Uncomment this if you run more than one Tor relay, and add the identity
## key fingerprint of each Tor relay you control, even if they're on
## different networks. You declare it here so Tor clients can avoid
## using more than one of your relays in a single circuit. See
## [Ссылки могут видеть только зарегистрированные пользователи. ]
#MyFamily $keyid,$keyid,...
## A comma-separated list of exit policies. They're considered first
## to last, and the first match wins. If you want to _replace_
## the default exit policy, end this with either a reject *:* or an
## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
## default exit policy. Leave commented to just use the default, which is
## described in the man page or at
## [Ссылки могут видеть только зарегистрированные пользователи. ]
##
## Look at [Ссылки могут видеть только зарегистрированные пользователи. ]
## for issues you might encounter if you use the default exit policy.
##
## If certain IPs and ports are blocked externally, e.g. by your firewall,
## you should update your exit policy to reflect this -- otherwise Tor
## users will be told that those destinations are down.
##
#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
#ExitPolicy accept *:119 # accept nntp as well as default exit policy
#ExitPolicy reject *:* # no exits allowed
#
## Bridge relays (or "bridges") are Tor relays that aren't listed in the
## main directory. Since there is no complete public list of them, even if an
## ISP is filtering connections to all the known Tor relays, they probably
## won't be able to block all the bridges. Also, websites won't treat you
## differently because they won't know you're running Tor. If you can
## be a real relay, please do; but if not, be a bridge!
#BridgeRelay 1
ExitNodes chomsky, rainbowwarrior, politkovskaja, rockhall, blutmagie, blutmagie2, blutmagie3, blutmagie4
StrictExitNodes 1
EntryNodes chomsky, rainbowwarrior, politkovskaja, rockhall, blutmagie, blutmagie2, blutmagie3, blutmagie4
StrictEntryNodes 1
ExcludeNodes {RU}, {HK}, {JP}, {KW}, {MY}, {TH}, {TN}, {VN}
Регистрация: 05.08.2011
Сообщений: 0
Популярность: 10
Сказал(а) спасибо: 0
Тор настройка help
ort also
