Регистрация Главная Сообщество
Сообщения за день Справка Регистрация
Старый 12.01.2012, 22:05   #1
 Разведчик
Аватар для kurakorts
 
kurakorts никому не известный тип
Регистрация: 12.01.2012
Сообщений: 0
Популярность: 10
Сказал(а) спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщениях
 
Question Не заходит

Создал сервер на hamachi я захожу все хорошо друзья логинятся, но при выборе сервера нажимают кнопку применить. и тишина. На окно создания персов не переходит. Помогите плз.

В Game Server
CommunityServer.properties:
Цитата:
# This is the Community Board server configuration file.

EnableCommunityBoard = False
CommunityServerHostname = localhost
CommunityServerPort = 9013
CommunityServerSqlDpId = 200
CommunityServerHexId = 123456

# NetCon configurations
# ================================================== ==============
# TCP Server start
# ================================================== ==============

# ExternalHostAddress: Use * bind all available IPs
# Default: *
ExternalHostAddress = 5.179.236.229
# ExternalPort: Use 0 bind all available Ports
# Default: 0
ExternalPort = 0
# ConnectionQueue: Maximum connections.
# Default: 50
ConnectionQueue = 50

# Default: False
FloodProtectionEnabled = False
# Default: 15
FastConnectionLimit = 15
# Default: 350
FastConnectionTime = 350
# Default: 700
NormalConnectionTime = 700
# Default: 50
MaxConnectionperIP = 50
# Default: False
IPBannEnabled = False
# Default:
IPBannList =

# ================================================== ==============
# TCP Client start
# ================================================== ==============
# SendBufferSize: DO NOT TOUCH!
# Default: 8192
SendBufferSize = 8192
# SendBufferSize: DO NOT TOUCH!
# Default: 8192
ReceiveBufferSize = 8192

server.properties:
Цитата:
# ---------------------------------------------------------------------------
# Game Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
#
# Note: External/Internal address definitions was moved to the ipconfig.xml
#

# Where's the Login server this gameserver should connect to
# Default: 127.0.0.1
LoginHost = 127.0.0.1

# TCP port the login server listen to for gameserver connection requests
# Default: 9014
LoginPort = 9014

# Bind address for gameserver. You should not need to change it in most cases.
# Default: * (0.0.0.0)
GameserverHostname = *

# Default: 7777
GameserverPort = 7777


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 153214

# Default: 100
MaximumDbConnections = 100

# Default: 0
MaximumDbIdleTime = 0

# ---------------------------------------------------------------------------
# Misc Server Settings
# ---------------------------------------------------------------------------
# This is the server ID that the Game Server will request.
# Example: 1 = Bartz
# Default: 1
RequestServerID = 1

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.
# Default: True
AcceptAlternateID = True

# Datapack root directory.
# Defaults to current directory from which the server is started unless the below line is uncommented.
#DatapackRoot = C:/Work/tmp/DataPack

# Define how many players are allowed to play simultaneously on your server.
# Default: 100
MaximumOnlineUsers = 100

# Numbers of protocol revisions that server allows to connect.
# Delimiter is ;
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 216
AllowedProtocolRevisions = 216


# ---------------------------------------------------------------------------
# Misc Player Settings
# ---------------------------------------------------------------------------

# Character name template.
# Examples:
# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*
# The above setting will allow names with first capital letter, next three small letters,
# and any letter (case insensitive) or number, like OmfgWTF1
# CnameTemplate = [A-Z][a-z]*
# The above setting will allow names only of letters with first one capital, like Omfgwtf
# Default .* (allows any symbol)
CnameTemplate = .*

# This setting restricts names players can give to their pets.
# See CnameTemplate for details
PetNameTemplate = .*

# Maximum number of characters per account.
# Default: 7 (client limit)
CharMaxNumber = 7

и Login server

loginserver.properties:
Цитата:
# ---------------------------------------------------------------------------
# Login Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------

# Bind ip of the LoginServer, use * to bind on all available IPs
# Default: *
LoginserverHostname = *

# Default: 2106
LoginserverPort = 2106

# The address on which login will listen for GameServers, use * to bind on all available IPs
# Default: *
LoginHostname = *

# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)
# Default: 15
IpUpdateTime = 15


# ---------------------------------------------------------------------------
# Security
# ---------------------------------------------------------------------------
# Default: True
LogLoginController = True

# How many times you can provide an invalid account/pass before the IP gets banned.
# Default: 10
LoginTryBeforeBan = 10

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.
# Default: 600 (10 minutes)
LoginBlockAfterBan = 600

# If set to True any GameServer can register on your login's free slots
# Default: False
AcceptNewGameServer = False

# Enforce GameGuard authorization from client?
# If True, login server will kick client if the client bypassed GameGuard authentication.
# Default: False
ForceGGAuth = False

# Flood Protection. All values are in MILISECONDS.
# Default: True
EnableFloodProtection = True

# Default: 15
FastConnectionLimit = 15

# Default: 700
NormalConnectionTime = 700

# Default: 350
FastConnectionTime = 350

# Default: 50
MaxConnectionPerIP = 50


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 153214

# Default: 10
MaximumDbConnections = 10

# Default: 0
MaximumDbIdleTime = 0


# ---------------------------------------------------------------------------
# Misc.
# ---------------------------------------------------------------------------
# If False, the license (after the login) will not be shown.
# Default: True
ShowLicence = True

# Default: True
AutoCreateAccounts = false


# ---------------------------------------------------------------------------
# Developer Settings
# ---------------------------------------------------------------------------
# Default: False
Debug = False

# Default: False
Assert = False

# Default: False
Developer = False

Вроде как я понял надо все в этих файлах править. Помогите плз. Зарнее спс.
  Ответить с цитированием
Старый 12.01.2012, 22:20   #2
 Разведчик
Аватар для maza13
 
maza13 никому не известный тип
Регистрация: 04.12.2011
Сообщений: 1
Популярность: 12
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
 
По умолчанию Re: Не заходит

Ты зарегал своих друзей?Или они сами регались где-то на сайте твоём??
Т.к. смотрю авторег отключен. Попробуй в конфиге логин сервера изменить строку:
# Default: True
AutoCreateAccounts = false <----тут замени на True
  Ответить с цитированием
Старый 12.01.2012, 22:42   #3
 Разведчик
Аватар для kurakorts
 
kurakorts никому не известный тип
Регистрация: 12.01.2012
Сообщений: 0
Популярность: 10
Сказал(а) спасибо: 0
Поблагодарили 0 раз(а) в 0 сообщениях
 
По умолчанию Re: Не заходит

Регались через вебобвязку

Добавлено через 2 минуты
Я пробовал через их лог, пасс заходить все хорошо заходит, а они нет. В чем дело?

Последний раз редактировалось kurakorts; 12.01.2012 в 22:45. Причина: Добавлено сообщение
  Ответить с цитированием
Старый 12.07.2012, 01:11   #4
 Разведчик
Аватар для Kalmoran
 
Kalmoran никому не известный тип
Регистрация: 09.07.2012
Сообщений: 5
Популярность: 12
Сказал(а) спасибо: 0
Поблагодарили 1 раз в 1 сообщении
 
По умолчанию Re: Не заходит

Сделай как maza13 сказал и все получится,удачи!)
  Ответить с цитированием
Ответ


Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
Не заходит в пв max2008k Общение и обсуждение Perfect World 14 01.01.2013 13:08
[Обсуждение] Не заходит на акк. Carrera_GTS Общение и обсуждение 1 26.08.2011 10:24
Не заходит Nuker Общение и обсуждение Perfect World 19 20.08.2011 21:13
[Помогите!] Срочно! Не заходит на акк! temka601997 Общение и обсуждение 2 15.08.2011 13:08

Заявление об ответственности / Список мошенников

Часовой пояс GMT +4, время: 16:35.

Пишите нам: [email protected]
Copyright © 2024 vBulletin Solutions, Inc.
Translate: zCarot. Webdesign by DevArt (Fox)
G-gaMe! Team production | Since 2008
Hosted by GShost.net